How do you open a Brinks lock without a key?

How do you open a Brinks lock without a key?


Short flex tension wrench with narrow bent end: Insert the narrow bent end of the short flex tension wrench into the key opening at the base of Brink's padlock.

Slide the slimline short hook all the way into the key aperture adjacent to the tension wrench, making sure it is completely secure.

If the padlock remains closed after the pins have been removed, the short hook should be reinserted.


To put it another way, how do you unlock a Brinks lock?

If you know the combination of a Brinks lock, you can open it.

To reset the lock, turn the dial a couple of times clockwise. Set the dial to the zero position ("0").

Turn the dial four complete rotations counter-clockwise.

Twice counter-clockwise rotation of the dial is required.

Turn the dial once clockwise and stop it on the third number of the combination on the second turn, then repeat the process.

Rotate the dial counter-clockwise until it reaches the fourth digit.


How do you pick a padlock with a paperclip, and what tools do you need to do so?

Begin by unwinding one paperclip so that it is straight with a hook at the end and another paperclip so that it is bent at a 90-degree angle. This will allow you to pick the lock. Then, using the bent end of the second paperclip, put it into the lock and spin it in the same direction as the lock's rotation.


Furthermore, how do you open a lock with a hairpin if you don't have a key?


Open up a bobby pin and bend it at a 90-degree angle to create a twisted look.

Remove the rubber tip on the straight end of the bobby pin and set it aside for later use.

Insert the pin's flat end into the top of the lock and bend it to the desired shape.

Make a handle out of the wavy end of the bobby pin to give yourself greater control.

In order to create the tension lever, bend the point of another bobby pin.


What is the best way to pick a padlock with a bobby pin?

One bobby pin may be used as a tension wrench, and the other as a pick. With the tension wrench applied with medium effort, put the feelerpick into the keyway, and scrape over the pins from the inside to the outside in just one direction. If you see that the plug is moving slightly, apply more strain to the tension wrench, and the lock will be freed as a result.


There were 21 related questions and answers found.


What is the best way to break a padlock with a screwdriver?

With a screwdriver, you may Jimmy a Tumbler Lock in Method 3. Locate a screwdriver with a tip that is tiny enough to fit inside the lock's opening and use it. The tip of the screwdriver should be inserted into the keyhole. While inserting and removing the screwdriver from the lock, jiggle it around. Continue to jostle the lock until it pops open by itself.


How can you pick a lock quickly and easily?

Scrubbing is the quickest and dirtiest technique of picking a lock, yet it is also the most effective. Insert the Tension Wrench into the bottom of the Key Hole and apply gentle pressure to the key hole. Insert the pick at the top of the lock. Scrub your pick back and forth in the key hole while applying a little amount of torque to your Wrench. Repeat the process until all of the pins are set.


How do you open a padlock if you don't have the key?

How to Unlock a Padlock Without a Key (with Pictures) Take out a lockpicking kit or use a pen and a tiny Allen key to pick the lock if you have one. Keep the lock in your left hand at all times. Remove the pen's pocket clip from its barrel. Using a tiny Allen key or a bend in the bottom half of the hair clip (approximately 1 inch from the bottom), secure the hair clip in place.


How do you unlock a four-digit lock if you don't have the code?

Pulling up on the dial and spinning it clockwise until the lock clicks can get you started on opening combination locks without a code. Then, look at your current position and multiply it by five to get your final position. Once you have that number in mind, put the dial to that position and crank it counterclockwise until you hear it click again.


What is the best way to hack a three-digit combination lock?

It must be unlocked. As a result of the Combination Turn the lock until the numbers are shown correctly on the right side of the lock. Continue to turn the centre dial around until the proper number aligns with the number to its left. Pulling the body of the lock away from the U-shaped metal ring without changing any of the dials will release the lock.


What is the best way to reset a Brinks lock if you don't have the combination?

Resetting the Brinks 7551 Combination Lock - Step by Step Instructions Make use of the current combination to unlock the lock. Pull the shackle up and around 180 degrees, then depress it and hold it in place for a few seconds. Turn the dials until the new combination is aligned with the arrow on the display. Release the shackle and turn it around 180 degrees to return it to its original place on the chain.