How much does it cost to replace timing belt and water pump Acura TL?


The typical cost of replacing the timing belt on an Acura TL is between $778 and $901 dollars. Labor expenses are expected to range between $327 and $414, while components are expected to cost between $451 and $487 per hour.


Another thing to be aware of is how to replace the timing belt on an Acura TL.

Jack and support vehicle are required for the first step.

Step 2 – Remove the serpentine belt from the vehicle.

Step 3 – Disconnect the crankshaft pulley from the engine.

Step 4 – Disconnect the belt tensioner.

Step 5 – Remove the timing belt covers from the machine.

Step 6 – Align the time markings with one another.

Step 7 – Remove the engine mount from the vehicle.

Step 8 – Disassemble and discard the old timing belt components.


Is the Acura TL equipped with a timing belt or a timing chain?

Acura timing belts are used in all late-model Acura cars equipped with a V6 engine, including hybrid vehicles. These cars include the Acura RL, TL, TSX (only available in V6 variant), MDX, and ZDX, among others. Even if an Acura vehicle equipped with a timing chain does not have a service period that necessitates the replacement of the timing chain, the chain might nonetheless fail.


What is the cost of changing the timing belt in this manner?

Replacement of the timing belt will cost you money. The cost of replacing a timing belt for preventative maintenance is approximately $500 to $900. However, if a damaged timing belt has caused damage to the valves, pistons, or water pump, it might cost up to $2,000 or even more to replace the belt.


The timing belt on a 2005 Acura TL should be changed when the vehicle reaches 100,000 miles.

Acura advises that you replace your timing belt every 60,000 to 90,000 miles on your vehicle. Scheduled Maintenance suggestions may be found in your owner’s handbook, and the specific recommendation can be found there as well. Your Acura’s model and model year will determine how much it costs.


There were 34 related questions and answers found.


Is it possible for a timing belt to endure for 200 000 miles?

Your owner’s handbook is an excellent source of information, and it will include the recommended mileage intervals for your individual vehicle make and model. Depending on the vehicle’s manufacturer, the suggested mileage range for timing belt replacement is anywhere from 60,000 miles to 100,000 miles, with a vehicle 6 to 10 years old as a starting point.


How long does a timing belt truly survive in the real world?

seven to ten years


Is it true that Acuras have timing belts?

The 2018 Acura MDX is equipped with a timing belt. With a timing belt, the engine is noticeably quieter than with a timing chain. Despite the fact that the belts are tough – made of rubber and fibreglass fibres – they need be changed every 60,000 miles or so.


Is there a timing belt or chain in an Acura TL from 2013?

These are the distinctions between the two MODEL YEAR ENGINE BELT/CHAIN. 2000–2006 Timing belt for the 3.5L V6 engine from 2007 to 2013. Timing belt for the 3.7L V6 J37A1 from 2014 to 2017. Timing belt for the 3.5L J35Y5 engine from 1999 to 2003. Timing belt for 2.5 L J25A engine


What is the best way to know whether your timing belt has been replaced?

Symptoms that your timing belt is worn out and should be replaced Noise. First and foremost, if your timing belt begins to make noise, it indicates that it is time to get it changed. Wear a belt that is visible. You should get acquainted with how things appear beneath the hood so that you can identify problems as soon as they develop. Misalignment. This is the first time the belt has been changed in a long time.


Is there a timing belt in an Acura TL from 2007?

The timing belt, drive/serpentine belt, tensioner, water pump, and coolant are all included in this.


Is there a timing belt in an Acura TL Type S from 2008?

Timing Belt for an Acura TL Type S from 2008. Dave, according to the instructions, the timing belt should be changed after 105,000 miles. That is the day on which your major service is due.


Do Hondas have engines that interfere with one another?

Honda. All Honda automobiles manufactured between 1984 and 1996 are equipped with interference engines. The engine codes for the Accord and Prelude from 1984 to 1989 are ES2, ES3, A18A1, A20A1, and A20A3 in the Accord and Prelude. The engine might have a displacement of 1.8 or 2.0 litres.


Is it possible for me to replace my own timing belt?

When changing the timing belt, it is advised that you acquire a timing belt kit, which contains the timing belt, the timing tensioners, and the seals necessary for the job. If you don’t know what you’re doing, I strongly advise you not to replace your timing belt yourself unless you are an expert. It’s possible that you’ll wind up having to hire a professional to replace your engine.


What happens if a timing belt breaks while you’re on the road?

The camshaft of an interference engine will stop spinning if a timing belt breaks while the engine is being driven, leaving part of the engine valves in the open position. This may result in significant engine damage, including broken or bent valves, damaged pistons, and, in some cases, a completely wrecked cylinder head and block.


What is the best way to replace the water pump with a timing belt?

In most cases, when the timing belt is changed, the idler pulleys, tensioner, and water pump should also be replaced. In the majority of situations, the water pump is driven by the timing belt, which means that it is time to replace the water pump. In addition, the manufacturer recommends using it.


What is the sound of a malfunctioning water pump?

A squeaking, ticking, or grinding noise will be heard while the engine is running if the water pump bearings are worn out. This is due to the fact that the shaft bearings are attempting to lock themselves into the pump housing. This bearing failure is caused by the pressure produced by the serpentine belt or the timing belt, which causes the bearing to fail.


Is it difficult to change the timing belts?

Because the timing belt is difficult to remove, Higgins suggests that the timing belt tensioner and serpentine belts be replaced at the same time as the timing belt. Higgins explains that after the timing belt has been removed, “there is relatively little work needed,” and that “these components have a high failure rate.”


How long does it take to replace the timing belt and the water pump on a car?

The timing belt replacement may be accomplished at the same time; however, private mechanics or shops would normally charge by the hour, which means additional 4 to 6 hours on average. To obtain a quotation for the water pump replacement and the timing belt repair, please complete the form below.