Is Moen metric or standard?

Is Moen metric or standard?


1) no, it's not metric. the size of the allen wrench might vary, per specific moen faucet model, but mine turned out to be 7/64th.


Keeping this in consideration, what size Allen wrench fits a Moen faucet?

Moen Renzo faucets require a 7/64-inch hex wrench for removal or repair. Handle screws for all Moen one-handle kitchen faucets also use 7/64-inch hex wrenches. The same hex wrench is also used to remove the PosiTemp lever used to control water temperature and flow in Moen showers.


Also, what is the difference between Moentrol and Posi Temp?

 Now we look at the differences between the two valves. The Moentrol has Temporature Memory. The Moentrol Valve has volume control which controls the water flow rate so you get the amount of water you want at the temperature you desire. The Moentrol has a flow rate of 7.5gpm while the PosiTemp has a flow rate of 6.3gpm.


Regarding this, how do I identify my Moen faucet model?

The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.


Are Moen and Delta interchangeable?

Its not really all that limiting. Both Moen and Delta put out fat catalogues of shower,tub shower and roman tub trims that will work with their respective "universal" valves. All in multiple assorted finishes.


35 Related Question Answers Found


What is the difference between Moen 1200 and 1225?

The biggest difference that you'll find with Moen shower valves is the Moen 1222 vs 1225 replacement cartridges. The 1225 is the updated version of the original 1200 single handle cartridge with a brass shell and brass piston. The Moen 1225 has a clear plastic shell with a brass piston inside of it.


How does Moen Posi Temp work?

A Moen PosiTemp shower valve keeps your water temperature steady within 3 degrees Fahrenheit at all times, according to Moen, but requires both hot and cold pressure to operate properly. The temperature limit stops on a Moen PosiTemp valve can also be adjusted to make the range of your handle turn longer or shorter.


How do you remove a Moen faucet handle without screws?

Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.


Where do I find my faucet model number?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."


How do you remove the set screw from a Moen faucet?

To remove a Moen kitchen faucet set screw or shower handle set screw, first coat the end of a 1/8-inch hex wrench with a generous amount of lapping compound. Insert the wrench into the screw head and push down. You might want to wait for an hour to allow the compound to stiffen.


How do you remove a Moen faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.


Does Moen give free replacement parts?

Moen Showerheads and Handhelds Warranty A replacement for any defective part will be supplied free of charge for installation by you. Defects or damage caused by the use of other than genuine Moen parts are not covered by this warranty.


How many types of Moen shower cartridges are there?

1200. Standard Cartridge. For One-Handle Posi-Temp® Faucets. 1222. Standard Cartridge. For One-Handle Posi-Temp® Valves. 1224. Standard Cartridge. 1225. Standard Cartridge. For One-Handle Faucets. 1248. Standard Cartridge. For Two-Handle Roman Tub Valves. 1225 Standard Cartridge. For One-Handle Faucets.


Is Moen a good brand?

Moen kitchen faucets are one of the best large-scale manufacturers of kitchen faucets in the market today. They have always been on the cutting-edge of innovation and their reputation is excellent. With Moen, you have an excellent opportunity to find the perfect kitchen faucet.


How long do Moen cartridges last?

20 to 30 years


How do I identify my faucet cartridge?

For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.