Can you put heat trace on PVC pipe?


PVC pipe is a dense thermal insulation. PVC pipe is usually rated as being able to withstand temperatures between 140 to 160°F. The trick is to insure the heat trace cable will maintain the contents within the PVC pipe at a desired temperature, but never to approach the pipe rating temperature.


Also, how do you install heat trace on PVC pipe?

How to Use Heat Tape on PVC Pipe

Determine how much heat tape the PVC pipe requires.

When wrapping the PVC pipe, start at the end where a GFCI plug receptacle is located.

Slowly wrap the entire length of PVC pipe with the heat tape.

Secure the heat tape to the pipe by wrapping electrical tape every two feet to secure the wire in place.


Furthermore, can you put heat tape on drain pipe?

Heat tape will work fine, it doesn’t get hot enough to melt things. There are thermostatic ones that are designed for the sole purpose of keeping things from freezing. PVC is rated for a minimum of 140 deg F.


Similarly one may ask, how do you heat trace a pipe?

Trace heating takes the form of an electrical heating element run in physical contact along the length of a pipe. The pipe is usually covered with thermal insulation to retain heat losses from the pipe. Heat generated by the element then maintains the temperature of the pipe.


Does heat tape use a lot of electricity?

Typical heat tape burns electricity at six to nine watts per foot per hour. That means each 100 feet of heat tape operating 24/7 can translate to an added monthly cost of $41 to $62 to operate heat tape, says Eileen Wysocki, energy auditor for Holy Cross Energy.


36 Related Question Answers Found


Can you heat trace PEX pipe?

You can use heat tape on pex, but you need to follow the manufactures recommendations. There is no real good way of telling if you need more for your pipes. Most of the time if your water lines are covered they should be fine.


How fast does heat tape work?

Allow it to set for 30 minutes. This amount of time will be sufficient to drop the temperature of the thermostat below 40 degrees F. If possible, do not allow water to flow through the water pipe you are testing.


How long does heat tape last on a mobile home?

Speaking of replacing, heat tape only has a 3-year lifespan. Most heat tape manufacturers warn that you should replace your heat tapes every 3 years minimum. Heat tape has a near-constant connection with both water and electricity and usually isn’t protected well from the elements.


What temperature does heat tape get to?

Heat tapes come in many various lengths and manufactures. The better quality tapes use a thermal sensor embedded in the tape to turn on the heating process once the temperature drops to around 38 degrees F (2 degrees C) (2 degrees C).


Can you splice heat trace?

Nelson™ Heat Trace splice connection kits are used to connect two heater cables to each other in a splice configuration. It may be used to extend cable length, connect different wattage cables together or to provide access to service removable equipment.


How does Raychem heat trace work?

nVent RAYCHEM brand self-regulating heating cables consist of two parallel conductors embedded in a heating core made of conductive polymer. The core is radiation-crosslinked to ensure long-term reliability. Heat is generated as electric current passes through the conductive polymer core between the cable’s conductors.


What is steam tracing in piping?

Steam tracing is heat tracing performed by circulating steam around process pipes to heat them. Steam tracing is normally installed on: Stagnant piping sections such as branch connections from parallel heat exchangers or pumps, bypasses around equipment.