What kind of oil does a Chevy Malibu 2010 take?

Answer

The 2010 Malibu is recommended to be serviced using SAE 5W-30 engine oil according to Chevy.

 

In a similar vein, the question is posed as to what kind of oil a Chevy Malibu requires.

A total of 4 quarts of 5W-30 motor oil is required for an oil change on the 4-cylinder Malibu. This engine is designed to run on synthetic oil, according to the manufacturer. Engine damage or overheating may occur if the improper kind of oil is used in the engine.

In addition, one can wonder how many quarts of oil a 2009 Chevrolet Malibu consumes. STP 5W-20 High Mileage Engine Oil 5 Quart STP 5W-20 High Mileage Engine Oil in a 5 quart bottle.

 

How much oil does a 2010 Chevrolet Malibu use in this manner?

The 2.4L and 3.6L engines in the 2010 Chevy Malibu have an engine oil capacity of 5.0 quarts and 5.5 quarts, respectively, when the filter is changed, according to the manufacturer.

 

Is it possible to use ordinary oil after using synthetic?

Because synthetic oil will mix immediately with normal oil of the same weight, there is no need to do any specific preparations while switching from synthetic to regular oil (no engine flush is needed). Because synthetic and traditional oils are compatible, switching from one to the other will not be hazardous.”

 

There were 38 related questions and answers found.

 

In order for my Chevy Malibu to run properly, do I have to use synthetic oil?

Synthetic oil should be changed every 7,500 to 10,000 miles, depending on the vehicle. An oil change is one of the most important and necessary repairs you can do on your vehicle. If you are using traditional oil, Chevy suggests that you get your Chevy Malibu oil and filter replaced every 3,000-5,000 miles or so.

 

What distinguishes Dexos oil from other oils?

Dexos® oils are manufactured completely with synthetics or synthetic blends, and include no natural ingredients. Antioxidant technology that is more effective in preventing oil from oxidising. Dexos® oils are designed to have a drain interval of up to 15,000 miles in most cases. Lower viscosity oil that stands up to engine combustion and heat better and for a longer period of time than competing lubricants on the market.

 

What is the cost of an oil change for a Chevrolet Malibu?

The typical cost of an oil change for a Chevrolet Malibu is between $95 and $120 dollars. Labor expenses are projected to be between $35 and $45 per hour, with components costing between $60 and $75 per hour. Taxes and fees are not included in this estimate.

 

What is the price of an oil change at Chevy’s?

The typical cost of an oil change for a Chevrolet Silverado 1500 is between $128 and $152, depending on the model. Costs for labour are expected to range between $38 and $49, while components are expected to range between $90 and $103. Taxes and fees are not included in this estimate.

 

What is the shelf life of complete synthetic oil?

“If you’re using full synthetic oil, we suggest going approximately 7,500 miles between changes,” says Leo Jay of Dere Auto in Seattle. “If you’re using conventional oil, we recommend going around 5,000 miles between changes.” As a result of the use of synthetic oil and certain manufacturers, Bell claims that intervals between oil changes may be significantly extended: As much as 15,000 miles or a year in certain situations, says the author.

 

Is it true that Chevy does free oil changes?

With every new Chevrolet vehicle purchase, you’ll get a free Chevrolet warranty that includes two free oil changes, roadside assistance, and other benefits. After you acquire a Chevrolet, you will be eligible for a variety of owner perks, which will offer you with peace of mind as well as additional value.

 

How many quarts of oil does a Chevrolet Malibu require?

a total of five quarts

 

What is the location of the oil filter on a 2010 Chevrolet Malibu?

There are two responses. 2.4L Ecotec engines are located on the front of the engine block, adjacent to the right side of the intake manifold and a few inches below it on the right side. Because it is a canister-type filter, the top of the filter housing must be removed, and a new oring must be lubricated and placed in its place.

 

Is it necessary for GM to use synthetic oil?

Your Chevrolet Certified Service professionals provide a variety of oil types, ranging from conventional to full synthetic, including ACDelco Conventional Oil, ACDelco dexos1TM Full Synthetic, and Mobil 1TM Full Synthetic, among others. Inquire with the professionals about the appropriate quality of oil to use for your unique Chevrolet model.

 

How much transmission fluid does a 2010 Chevrolet Malibu require?

ACDelco® ProfessionalTM Full Synthetic DexronTM VI Automatic Transmission Fluid for the 2010 Chevrolet Malibu 2.4L engine.

 

What kind of oil does a 2011 Malibu require?

Eneos® SAE 5W-30 Full Synthetic Motor Oil is recommended for the Chevrolet Malibu 3.6L 2011.

 

What kind of oil does a 2011 Malibu consume?

Chevrolet Malibu is the vehicle in question (USA) Capacity and filtering of the engine Malibu 2.4 16V (2008 – 2010) Malibu 2.4 16V Malibu LE5 4.7 l 4.97 US Quarts / Filter: n/a Malibu LE5 4.7 l 4.97 US Quarts / Filter: n/a 2.4 16V (2011–2012) 2.4 16V (2011–2012) LE5 filter: not applicable 4.7 l 4.97 US Quarts Malibu Engine: 2.4 Ecotec VVT DI (2013-2015). LUK Malibu 3.5 V6 (2004 – 2006) 4.7 l 4.97 US Quarts / Filter: n/a Malibu 3.5 V6 (2004 – 2006) No filter on the LX9 (3.8 litres, 4.02 US Quarts).

 

For a 2010 Chevy Malibu, how much transmission fluid is required?

The 4-speed gearboxes in the 2010 Chevrolet Malibu use 7.0 quarts of transmission fluid. In addition, it consumes 5.3 qt for the 6-speed gearbox systems.